型号：82-140-1B
规格：9V/13500mAh
用途：用于丹麦SATLOR EPIRB
示位标
BATTERY REPLACEMENT KIT
McMurdo replacement battery kits 82-140-1 (black)
82-140-1B (green)
Applicable to model E3 EPIRBs manufactured by McMurdo and marketed under various brand labels:
McMurdo E3
McMurdo Rescue 406
Pains Wessex SOS Rescue 406
SAILOR EPIRB
SEA 406
The kit contains the following parts :
Battery pack
Label expiry
Battery replacement
The EPIRB uses a 9V Lithium battery pack, McMurdo type 82-140. Typically this will have to be replaced every 5 years. The exact battery expiry date is marked on the rear of the EPIRB lens dome and if you have a full enclosure it is also marked on the outside of the enclosure. The battery expiry date should be checked regularly. You will need to replace the battery when:
The expiry date has been reached or The EPIRB has been used in an emergency situation or A false activation exceeds 2 hours of use.
The steps to replace the battery Please replace the battery under the deck Locate a flat bladed screwdriver with a long reach.
Unscrew and retain the front 4 sealing screws.
Pull the lanyard out and remove the 2 hidden rear screws.
Do not as yet remove the sea contact screws.
Lift the lens dome off. Remove and retain the blue gasket.
Avoid touching the circuit board and the glass strobe tube.
Hold the hexagon shaped pillars and remove the sea screws.
Use a cross-headed screwdriver to remove the front screw.
Grip the white plastic coil former and lift the circuit board up 3cm (1”).
Using fingers, unplug the white 4-way battery connector.
Unscrew the nut fixed, remove the old battery.
Replace with new batteries, installed EPIRB, labeled with the battery attached is valid tags.
Batteries contain hazardous material and must be handled and disposed of in accordance
with local regulations.
